Push-to-Talk (PTT)

Definition

Push-to-Talk (PTT) refers to the function of activating the aircraft radio transmitter by pressing and holding a button during voice communication. PTT ensures that only one party transmits at a time on a given frequency, maintaining clarity, control, and order in aviation radiotelephony.
PTT is typically activated using a yoke- or stick-mounted switch, a panel-mounted button, or a handheld microphone.

Purpose

  • Allow the pilot to control when they transmit on the radio
  • Prevent simultaneous transmissions that cause interference ("blocking")
  • Enforce concise, intentional communication
  • Maintain radio discipline and reduce congestion on busy frequencies

How PTT Works

  • Pilot presses and holds the PTT switch to transmit
  • While the switch is held, the microphone is live, and ATC or other aircraft can hear
  • Upon release, the system returns to receive mode, allowing incoming messages
  • Only one transmission can be clearly received per frequency at a time

PTT Configurations

SetupUse Case
Yoke/stick-mounted buttonMost common in GA and commercial aircraft
Hand mic with PTT switchUsed in older aircraft, backup systems
Helmet-mounted PTT (military)Hands-free use in tactical ops
Dual PTT (pilot/copilot)Shared radios with independent controls

Best Practices for Using PTT

  • ✅ Plan what to say before pressing
  • ✅ Press–pause–speak: wait half a second after pressing before speaking
  • ✅ Speak clearly and steadily
  • ✅ Release button after speaking to hear reply
  • ❌ Don’t press the button while thinking or hesitating
  • ❌ Avoid long transmissions or overlapping calls

PTT Phraseology Example

Press PTT: “Salzburg Tower, OE-XYZ, ready for departure runway 15.”
Release PTT
Wait for response before pressing again

Radio Blocking

If two aircraft transmit simultaneously, ATC may hear a garbled or unreadable message, known as blocking. This usually results in:

  • “Two aircraft transmitting simultaneously, say again.”
  • Pilots must pause and repeat their message individually.

Emergency Use of PTT

In urgent situations, concise use of PTT is critical:

“Mayday, Mayday, Mayday, engine failure, OE-ABC, 5 miles west of LOAV.”

Don’t hold the button for extended explanations — keep it clear and short.

Tips for Pilots

  • Practice smooth, confident use during LearnATC simulations
  • Always check mic and PTT function during preflight
  • Avoid “hot mic” errors by releasing the button after speaking
  • Stay silent unless necessary — the airwaves are shared






Request failed with status code 500
Помилка сповіщенняНатисніть, щоб закрити
Request failed with status code 500
Помилка сповіщенняНатисніть, щоб закрити
Request failed with status code 502
Помилка сповіщенняНатисніть, щоб закрити
Request failed with status code 502
Помилка сповіщенняНатисніть, щоб закрити